Loading... Please wait...
Hi-Intensity LEDs for Motorcycles, RVs, Motorhomes, Boats, Golf Carts, ATVs, Cars and more!
  • Boogey Lights Hi-Density Low-Profile LED Strips
  • Boogey Lights Hi-Density Low-Profile LED Strips
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

Hi-Density Low Profile LED Light Strips


Product Description

New Product!  Boogey Lights® has always been known for our high-quality, super bright LED light strips.  Our new HI-DENSITY low-profile LEDs take brightness to a whole new level.  We took our time-tested Value Series 5050 super-bright hi-intensity LEDs and mounted them on two ounce copper PCB as close together as possible.  The end result is an ultra-bright super-intense concentrated amount of light in a small area.   In fact, these lights are so bright we don't recommend looking at them directly!  Like all of our Value Series LED products these HI-DENSITY lights are built on two ounce copper PCB with 1.2mm of industrial strength genuine 3M adhesive affixed to the back making them ideal for motorsports applications.   There is a 36" power lead.   These lights are ideal for installations where you want to absolutely flood an area with the brightest light possible.    Our HI-DENSITY low profile LEDs are available in 6, 12, 18 and 24 LED configurations.  Color options are: WHITE, BLUE, RED, ORANGE, GREEN and RGB (multi-color).   


  • 6 LEDs: 58 mm long (approximately 2-1/4")
  • 12 LEDs: 116 mm long (approximately 4-1/2")
  • 18 LEDs: 174 mm long (approximately  6-3/4")
  • 24 LEDs: 232 mm long (approximately 9")
    (all Hi-Density strips are 10mm wide)

Power Lead: 36"
Power Input: 12vdc
Max Amperage: 6 LEDs=.15, 12 LEDs=.29, 18 LEDs=.44, 24 LEDs=.57
(Note:  The colors white and blue pull the max amps. The remaining colors use less power.)

RGB light strip requires a Boogey Lights® positively switched controller to operate.
Three year original owner warranty.

IMPORTANT NOTE: Because the LEDs on our Hi-Density LED strips are mounted as close together as possible on two ounce copper PCB, these light strips are extremely bright. We do not suggest looking directly at them. Also, they produce more heat. They will get hot to the touch - as much as 125 degrees (f). Care must be taken when mounting not to place them next to materials that might be heat sensitive.


All Boogey Lights® LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferrior design when compared with COMMON CATHODE LEDs.


LUX vs LUMENS? We use LUX — Here's Why

Blue 89 180 260 482
Orange 42 87 130 182
Green 107 224 331 422
Red 79 139 203 255
White 181 338 522 682
Red 24 52 67 90
Green 34 77 101 137
Blue 30 64 84 113
Pink 51 109 147 197
Light Blue 65 140 185 247
Yellow / Amber 56 123 161 217
White 85 182 243 324


LUX ratings are done in the USA using a National Institute of Standards and Technology (NIST) certified light meter and 3 cubic foot light box on the final, fully assembled product as delivered to the customer. While higher LUX values can be obtained using higher input voltages and a smaller light box, we use input voltage of 12.6vdc and a three foot cubic light box because we beleive this configuration to be an accurate representation of real-world use of our lighting products.

For LUX brightness data on this product visit the Boogey Lights® LUX DATA page.



Product Reviews

  1. Great product, easy installation.

    Posted by Rob Birdsall on 1st Apr 2017

    I've installed several sets of the 8.5" strip lights in some enclosed trailers. The low amperage draw allows me to tie them into the existing fixtures. I remove the fixture, notch it with a dremel tool and run the wire into the fixture. I also swap the incandescent bulbs in the fixtures with retro fit LEDs. The retro bulbs don't add much light on their own but combination makes the interior super bright.

Customers also viewed

Related Products

Click the button below to add the Hi-Density Low Profile LED Light Strips to your wish list.