Heavy Duty LED Strips - Clearance

Install Resources
Current Stock:

Check out the Lighting Builder for a more customized experience.

Lighting Builder

Heavy Duty LED Strips

The BRIGHTEST, TOUGHEST Heavy Duty LED Strip Available

This is a clearance item. These strips have slight blemishes and/or flaws which mean they cannot be sold as new. Quantities are limited. No warranty. No return. All items are tested to be working. Note: Not all product configurations are available for clearance.

Boogey Lights® HEAVY DUTY LED STRIPS are designed to be used in tough, outdoor and commercial applications where the lighting strip might be subject to direct impact or submersed in water. The flexible PVC provides an extra, dual layer of protection above and beyond our already tough LED light strips. Ideal for off-road machines, ATVs, side-by-sides,  tool box compartments, vehicle storage bins, truck beds and heavy duty truck commercial applications. Also ideal for marine applications where the LEDs will be submerged in water for brief periods.  

Tougher AND Brighter
Depending upon the length, each Heavy Duty LED Strip contains between 15 and 75 high-intensity super-bright 5050 tri-chip LEDs. No other Heavy Duty LED strip on the market today has more LEDs per foot than Boogey Lights®.  The PCB is black, created with 2 ounce copper and encased in industrial grade PVC with 1.2mm of 3M® VHB tape affixed to the back. Additionally, the end caps have a screw hole allowing these strips to be screwed to the mounting surface for additional holding power. We are not aware of any other product on the market today that matches these specifications for toughness and brightness.

The fully encased, flexible design allows these strips to flex so they can be mounted on a curved surface. The flexible PVC also protects the LEDs from a direct hit (e.g. rock, hammer, tool box, tire chains, etc) as well as allows them to be submersed in water. Boogey Lights® Heavy Duty LED strips are available in six colors and five lengths ranging from 1 foot to 5 feet. And because these Heavy Duty LED Strips are an exact color match to our popular motorsports LED strips and PODs, they can be mixed and matched with any of our lights or controllers to fit virtually any operating environment or application.

The Heavy Duty LED strips include a 36" power lead. If you wish to extend the power lead we offer a POWER LEAD EXTENSION kit in variable lengths of 10, 15, 20 and 25 feet.

NOTE: The RGB Heavy Duty LED Strip requires the use of a controller (not included) to power the LED strip. We offer a wide selection of LED CONTROLLERs here.

DOT COMPLIANCE: The AMBER and RED single color LED strips are DOT COMPLIANT. They conform to applicable provisions of the Federal Motor Vehicle Safety Standard 108 requirements.

Your choice of LED color: Red, Green, Blue, Orange, White, RGB (controller required).
Your choice of length: 15 LEDs (~12"), 30 LEDs (~22"), 45 LEDs (~32") , 60 LEDs (~42"), 75 LEDs (~53").
Clearance Item. No Warranty. No Return.


IMPORTANT NOTE: To achieve the full adhesive strength of the 3M® tape affixed to the back of each Heavy Duty LED strip 3M® Adhesion Promoter (aka Primer) must be applied to the mounting surface first. This is an important step to ensure a secure bond. The 3M® Adhesion Promoter creates a chemical bond between the tape and the surface such that the LED strip will stay stuck (at least until you decide you want to remove it). Using any other solvent such as rubbing alcohol or acetone is not the same thing as using 3M® Adhesion Promoter. While these solvents will help clean the surface, they do not prime the surface. There is a difference.

3M® Adhesion Promoter is NOT included with this single strip.  The promoter can be purchased separately on our website in individual tubes, 25 pack or 8oz cans. It can also be purchased at popular retailers and auto parts stores across the country.  This is particularly important for the longer Heavy Duty LED strips since the screws will only secure the two ends of the strip to the mounting surface. If you want this Heavy Duty LED strip to stay stuck, please take our advice and prep the mounting surface with 3M® Adhesion Promoter before mounting.

Did we mention that using 3M® Adhesion Promoter to prepare the mounting surface is a step you should not skip?

Heavy Duty LED Strip Specifications

15 LED Strip: 12.25" long x .5" wide x .25" high, 2.2 ounces

30 LED Strip: 22.25" long x .5" wide x .25" high, 3.1 ounces

45 LED Strip: 31.75" long x .5" wide x .25" high, 4.3 ounces

60 LED Strip: 41.25" long x .5" wide x .25" high, 5.4 ounces

75 LED Strip: 52.25" long x .5" wide x .25" high, 6.5 ounces

DOT COMPLIANCE: The AMBER and RED single color LED strips are DOT COMPLIANT. They conform to applicable provisions of the Federal Motor Vehicle Safety Standard 108 requirements.

IP67 Rated
Input Voltage: 11-14vdc
36" black power lead, 26AWG (2 conductor for single color, 4 conductor for RGB).  If you want to extend the power lead we offer a  POWER LEAD EXTENSION KIT in lengths of 10, 15, 20 and 25'. 
All Boogey Lights® LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because they're less expensive to manufacture. As a result, they're not nearly as bright and are an overall inferrior design when compared with COMMON CATHODE LEDs.
While our Heavy Duty LED Strips are designed to take a beating, it’s important you do not bend the strips in a radius of less than two (2) inches. Doing so will damage the circuit traces causing the strip to fail and voiding the warranty.
NOTE: LED Strips are waterproof but not intended for use in salt-water applications or to be submersed in water for extended periods of time.

Amperage & LUX Data

LUX vs LUMENS? Here's why we use LUX.

15 LEDs RGB* 0.275 146
  RED 0.261 127
  BLUE 0.305 120
  GREEN 0.273 139
  WHITE 0.319 254
30 LEDs RGB* 0.526 242
  RED 0.516 201
  BLUE 0.531 280
  GREEN 0.521 312
  WHITE 0.605 515
45 LEDs RGB* 0.723 377
  RED 0.672 309
  BLUE 0.743 329
  GREEN 0.647 407
  WHITE 0.729 664
60 LEDs RGB* 0.915 542
  RED 0.917 367
  BLUE 0.921 402
  GREEN 0.888 550
  WHITE 0.934 823
*RGB values tested on WHITE.