Hi-Intensity Multi-Color Touring/Bagger Motorcycle LED Light Kit

Install Resources
UPC: 812928020035
Current Stock:
UPC: 812928020035
Warranty: Original Owner LIFETIME Warranty on the LEDs. Three year on the controller
Light Strip Dimensions: 20"L x 3/8"W x 1/8"H
UPC: 812928021759

Check out the Lighting Builder for a more customized experience.

Lighting Builder

OOS Message

OOS Message

Hi-Intensity Multi-Color Touring & Bagger Motorcycle LED Light Kit 150 LEDs

Now with 40% more LEDs! Introducing our Hi-Intensity Multi-Color Touring & Bagger LED Light Kit. Our most requested setup for baggers and touring bikes at an amazing price! This kit will light your bike from front to back. Built on our Hi-Intensity Motorsports LED strips, these strips have more LEDs per inch than comparable strips on the market today. More LEDs means more light shining on your bike! This kit uses a new and improved configuration of our Value and Premium Series LED strips with 40% more LEDs. Built with two ounce copper PCB, the brightest 5050 LEDs available and 1.2mm of genuine 3M® VHB double sided tape, these LED strips are made tough for motor sports applications. Impressively bright, our Hi-Intensity LED strips are thin so they can barely be seen when attached to the bottom of your tank or under your saddle bags. They produce a smooth, even glow of light. This Touring and Bagger kit lights your bike with any of seven different colors and animate them with special effects using the included wireless RF + Bluetooth combo remote control.

Boogey Lights RF + Bluetooth Controllers displays seven colors (steady on + four lighting effects): RED, GREEN, BLUE, WHITE, LIGHT BLUE, BOOGEY LIGHTS GREEN (LIME GREEN/YELLOW), HOT PINK/PURPLE using the RF wireless remote. The lighting effects options for our RF Controller include: DIMMING, BLENDING, BREATHING, STROBING. In the Blending, Breathing and Strobing modes these features can be set to remain on a single color or to cycle through each of the 7 colors. You can also adjust the speed at which this happens. The RF remote control offers SEVEN levels lighting effects (e.g. 7 levels of dimming). This LED controller is also BLUETOOTH enabled. Using our free BLUETOOTH APP, you can access even more features including up to 16 million combinations, presets and color rotation programming. More detail about this on the OPTIONS and CONTROLLER tab including a video showing how our Bluetooth APP works. Original owner lifetime warranty on the LED strips. Many upgrade options too including Bluetooth wireless controller along with adding more lights.

NOTE: Above photo has additional lighting for the front wheel added inside the fender. 


Our Hi-Intensity Multi-Color Touring & Bagger LED light kit is offered in two LED strip length configurations. We do this because some bikes have larger fuel tanks than others. The larger/longer fuel tanks have more room for LEDs on the bottom of them. Each configuration includes 8 Hi-Intensity LED surface mounted flexible strips in varying lengths plus two RGB LED strips, each with 6 LEDs plus 7' power lead to wrap around the brake calipers. There's an option to add a front wheel wiring kit with steel braid. You'll typically want to choose the LED length configuration that has two LED strips that best fit the entire length of your fuel tank.

Configuration 1 (150 LEDs)
2 - 18 LED strips. Each strip is 12.25" long (fuel tank)
1 - 18 LED strip. Strip is 12.25" long (ground effects)
2 - 6 LED strips. Each strip is 4.5" long (horn and breather)
1 - 12 LED strip. Strip is 8.38" long (battery box)
2 - 30 LED strips. Each strip is 20" long (saddlebags)
2 - RGB LED strips, each with 6 LEDs + 7' of power lead (front wheel / brake caliper)

Configuration 2 (156 LEDs)
2 - 24 LED strips. Strip is 16.13" long (fuel tank)
2 - 3 LED strips. Each strip is 2.5" long (horn and breather)
1 - 18 LED strip. Strip is 12.25" long (ground effects)
1 - 6 LED strip. Strip is 4.5" long (battery box)
2 - 30 LED strips. Each strip is 20" long (saddlebags)
2 - RGB LED strips, each with 6 LEDs + 7' of power lead (front wheel / brake caliper)

*Each LED strip has a 36" power lead (22 gauge) hard wired to the end with the other end sealed. If necessary you can cut the LED strip every 3 LEDs. Just be sure to seal the end with liquid electrical tape or similar substance to keep from shorting out when wet.
Your choice of LED lengths from either of two configurations:
CONFIG 1) 3 - 18 LED strips, 2 - 6 LED strips, 1 - 12 LED strip, 2 - 30 LED strips.
CONFIG 2) 2 - 24 LED strips, 2 - 3 LED strips, 1 - 18 LED strip, 1 - 6 LED strip, 2 - 30 LED strips.
See LED lengths for each configuration in the product description.
Two (2) - Multi Color RGB LED strips with 6 LEDs + 7' power lead to wrap around the brake calipers
Standard Front Wheel Wiring Kit.
Optional upgrade to add 6' of steel braid to cover the black wires (the front wheel wiring kit).
RF + Bluetooth Combo LED controller with Brake Flash integration. Click on the OPTIONS and CONTROLLER tabs for more details on each.
Wiring kit with push button on/off switch, promoter and installation instructions. Everything you need to install all the lights in this kit
Three year original owner warranty on the LEDs and controller.

OTHER ITEMS YOU MAY NEED TO COMPLETE YOUR INSTALL. No two installation scenarios are the same. Not everyone shares the same installation quality goals. Some folks are OK with twisting wires together, others want to solder them. Some folks are OK with running wires where they may be seen or unprotected to save money/time, others want a tidy, clean install without any wires showing. Some folks are OK with mounting their LED strips to whatever surface they can find, others want to take the time necessary to build out appropriate mounting surfaces to provide the best lighting effect on their vehicle. The point is it's not possible to provide all the materials necessary for all installation scenarios and quality goals. Our light kits provide the essential components needed for a high-quality, functioning lighting system. Installation of our light kit to your specific vehicle may however require additional items to make it look and fit the way you want. This is particularly the case with electrical wiring and mounting of LED strips. Before proceeding with your installation we suggest you consider THESE OTHER ITEMS you may need.

Wireless Controller Options

This LED light kit includes our PLUS SERIES RF + BLUETOOTH LED Controller which is rated up to 300 LEDs. Perfect for those who want to light it all up and then some! This LED controller includes 2 KEY FOBs (RF remote controls) along with BLUETOOTH remote control integration. This LED controller measures 2-1/2" x 1-3/4" x 7/8". In addition, the controller includes our Brake Flash integration feature (see details below).

Brake Light Interface

The RF + Bluetooth Combo LED Controller includes our BRAKE LIGHT INTERFACE. When connected to the 12vdc brake light circuit, it will turn multi-color accent lights to red whenever the brakes are engaged. Its a great motorcycle safety feature to make sure you're seen. You do not have to use the brake flash feature. If you don't want it, simply cap the 12vdc power input going to the LED controller.

Note: Our controllers have built in protection against overload, short circuit or reverse polarity situations. If it detects any problems the controller will shutdown and not function until the fault is repaired. While these are rated for a specific number of LED's your particular installation may affect the actual number of LED's you can run on these controllers.

If you prefer a WIRED controller option (vs wireless), we offer several alternatives to our wireless controllers. Here's a link to our WIRED CONTROLLERS. Let us know know you would prefer a WIRED controller and we'll adjust the price for you.

Why Bluetooth?

With any of the Boogey Lights® BLUETOOTH controllers you can control your lights with your Bluetooth 4.0 enabled Android or IOS smartphone. These high-tech controllers are capable of displaying 16 million different color combinations (versus 7 with our standard RF remote). In addition, lighting effects on the Smartphone controller are signficantly more controllable in terms of speed and intensity. Each color and lighting effect is controlled by "sliders" or a color square on your smartphone screen so you can adjust the speed and intensity to get the lighting exactly the way you want it. Also, all of our Bluetooth Combo controllers include an RF remote control allowing for quick on/off of the controller. You can operate this controller with the included RF wireless remote (KEY FOB remote included) OR you can use your Bluetooth 4.0 enabled smartphone and our free smartphone APP (Android and IOS). Also, with our new SERIES 2 firmware, you get our popular PROGRAMMABLE COLOR ROTATION feature that allows you to program which colors you wish to display and then have those colors rotate through a sequence you define. Bluetooth also gives you the ability to save up to three of your favorite color and feature configurations that can be recalled at the press of a button. We offer a variety of Bluetooth controllers for just about any application. We even offer a COMBO controller that includes both Bluetooth and RF remote control in one easy to use controller.


More About the Boogey Lights® Bluetooth Smartphone APP


COMBO RF + BLUETOOTH. Smartphone BLUETOOTH and RF Wireless Combined In ONE Controller. Our RF + BLUETOOTH COMBO controller combines the best of our RF and Bluetooth controllers into one simple to use controller. You can operate this controller with the included RF wireless Key FOBs OR you can use your Bluetooth 4.0 enabled smartphone and our free smartphone APP (Android and IOS). They work interchangeably. With the included Key FOBs you get all of the functionality of our popular Fireworks Multi-Function Remote Control that allows you to change between 7 colors and functions of on/off, blending, strobing, breathing, flashing and fading. You can also use your Bluetooth enabled smartphone to create that custom look with over 16 million different color combinations plus three pre-sets. .

Typical Installation

Each strip has a 36" power lead hard wired to one end of the strip. On a V-Twin the suggested layout for the lights is as follows:

  • Depending upon the LED configuration you purchased, install the 18 LED (or 15 LED) under the bottom of the tank on both sides. Install the 6 LED (or 3 LED) inside the horn cover and behind the breather backplate.
  • Depending upon the LED configuration you purchased, install the 6 LED (or 9 LED) behind the engine on the seatpan, oil/battery box or frame downtube. Align it to shine on the rear of the engine. Take the longer LED strip (15 or 12 LEDs depending the configuration you purchased) and install on the frame below the engine. Install on the inside of the frame so it won't be damaged by a jack or when loading onto a trailer.
  • Use the two 30 LEDs strips for rear saddlebag lighting. Measure your saddlebag support frames to see what will fit. If necessary, cut the strips and install on the bag frame support - not on the bag itself. Align slightly inward to light the pipes, rear wheel and ground. On some models that have a fender extension between the bag and fender you can cut one strip and install a segment on each extension. This blows the light down and toward the front of the bike. .
  • Install one 6 LED strip on the backside of the caliper to light the bottom of the wheel. Run the power lead up the brake line and back to the power source. On bikes with a single caliper consider using the second strip on the rear wheel. You might also be able to install these strips inside the fender or under the fender strut. Looks nice!

This kit is easy for a do-it-yourselfer. Includes all you need other than a few hand tools. Just like the chrome on your bike, this kit is fully expandable and allows you to easily add additional strips in the future.

These lights will also work well on a Can-Am Spyder. Order some extra strips until you get the coverage you want.

NOTE: We always recommend dry fitting or temporarily mounting the lights before installation to make sure you get the look you want. The suggestions above are our recommendations. The final mounting location for the lights comes down to your personal preference. So put them where it makes sense to you and for your bike.

Sealed, Flexible Strips

The LEDs on our HI-INTENSITY strips are sealed against the elements. They are heat resistant, waterproof and easily cleaned for a lifetime of maintenance free operation. The soft, gel-like strips provide maximum flexibility and a clean and sleek appearance. Their low profile design makes them virtually invisible when placed on the bottom of your tank and their wide viewing angle floods your bike with light.

Each strip has a 36" power lead which is hard wired to one end of the stip. If you need to cut a strip, be sure to cut where indicated on the strip (ever 3 LEDs) and make sure you seal the cut end with liquid electrical tape or something similiar to keep water from shorting out the strip. A wrong cut in the wrong place or not sealing the cut end properly will void your warranty. Call us if you are unsure where to make your cut.

Waterproof Black Quick Connector Options

The answer to future routine maintenance. Add these Waterproof Black Quick Connectors to your kit. Install inline on your tank wiring, breather, bags, side panels etc. Wherever future maintenance may require access.