Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Save!
Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects Value Series™ Single Color 63 LED Engine Kit with Ground Effects

Value Series™ Single Color 63 LED Engine Kit with Ground Effects

$89.95 $105.99 (You save $16.04)
Install Resources
SKU: KMV-VS-EK-21L3
Warranty: Original Owner Three (3) Year Warranty on the LEDs and Controller
AMPS: Full strip draws a maximum of just .49 amps at full power (white)
Light Strip Dimensions: 20"L x 3/8"W x 1/8"H
UPC Amber: 812928020219
UPC Blue: 812928020226
UPC Green: 812928020233
UPC Light Blue: 812928020240
UPC Orange: 812928020257
UPC Pink: 812928020264
UPC Red: 812928020271
UPC UV/Purple: 812928020288
UPC White: 812928020295
Retail Packaging? (Dealers Only)

Check out the Lighting Builder for a more customized experience.

Lighting Builder
Pay Later in 4 Equal Installments, Interest Free!

Value Series™ Single Color 63 LED Engine Kit with Ground Effects

A great looking single color LED light starter kit for touring and cruiser bikes at an amazing price!

Includes
Three (3) - 21-Cluster single color LED strips in your choice of color. Each LED strip is 50cm long (about 20")
Complete wiring kit with push button on/off switch, in-line fuse and installation instructions
Original Owner Three (3) Year Warranty on the LEDs and Controller

Kit Options

Optional Add-ons

  • Saddlebag Lights - Single strip with 1 - tube of promoter OR Two strips with 2 - tubes of promoter for installation
  • Wheel Lights - Choose from single or two wheel lights in your choice of color for your front wheel or any other location where you want more light. Includes mounting supplies
  • Front Wheel Wiring Kit with Steel Braid - A must have for those with braided lines. Includes mounting supplies, 6' of steel braid and chrome ties
  • Waterproof Black Quick Connector - Add these to your kit for the tank, bags or where side panels need to be removed for routine maintenance.
  • Remote Control - No remote is included with the kit. Choose from our basic on/off remote, our original, our PLUS, our SUPER series multi-function remote and now our NEW 3ZONE Bluetooth Controller.

Remote Control Options

This kit includes a pushbutton on/off switch. For added convenience, consider purchasing one of our remotes to control your lighting remotely. Here is a review of what's available for single color lights:

  • Basic On/Off Remote - Wireless RF, 2 Key Fobs, simple on/off operation. Rated for 250 LEDs.
  • Original Multi-Function Remote - Wireless RF, 2 Key Fobs, special effects include flashing, strobe, breathing and fading. Rated for 100 LEDs.
  • PLUS Series Multi-Function Remote - Wireless RF, 2 Key Fobs, special effects include flashing, strobe, breathing and fading. Rated for 300 LEDs.
  • SUPER Series Multi-Function Remote - Wireless RF, 2 Key Fobs, special effects include flashing, strobe, breathing and fading. Rated for 900 LEDs.
  • Original Bluetooth Smartphone Controller - Wireless Bluetooth. Operate your lights using your Android or iOS smartphone. With the free app you can connect your single color lights to different zones and light your bike in sections or in it's entirety. Rated for 100 LEDs.
  • PLUS Series Bluetooth Smartphone Controller - Wireless Bluetooth. Operate your lights using your Android or iOS smartphone. With the free app you can connect your single color lights to different zones and light your bike in sections or in it's entirety. Rated for 300 LEDs.
  • SUPER Series Bluetooth Smartphone Controller - Wireless Bluetooth. Operate your lights using your Android or iOS smartphone. With the free app you can connect your single color lights to different zones and light your bike in sections or in it's entirety. Rated for 900 LEDs.
  • SUPER Series Bluetooth 3 ZONE Single Color Smartphone Controller - NEW! Designed specifically for single color lighting environments. Designed with creativity in mind, this Bluetooth controller allows you to isolate up the three zones of single color LEDs and then control each of those zones independently with your smartphone. Within each zone you can select the feature setting of OFF, STEADY-ON, FLASHING, STROBING or BREATHING. And for each feature within each zone you can adjust both the BRIGHTNESS and SPEED of the feature. In addition, there are three PRESETs you can configure for each zone. Free Android or IOS APP. Rated for 900 LEDs.

Installation Tips

Typical Installation

Each strip has a wire lead on both ends allowing you to cut each strip into two pieces of 3-cluster multiples. Cut each strip into two pieces creating an 18-LED cluster strip to place under each side of your tank and a 3-LED cluster strip to place behind your breather & horn cover. For metric bikes or v-twins with longer tanks, simply cut off one of the wire leads and place the entire strip under the tank on each side of the bike.

When choosing saddlebag lights some bikes have room for an entire strip under each bag. The strip should be mounted to the frame and not the bag itself. Measure your bike to see what will fit. On Street Glides you can mount a segment to each fender extension to light up the rear of the bike.

Front wheel lights are designed to mount to the inside of your brake caliper. Bikes with dual disc up front will want to order 2 - lights to fully light the front wheel. Some single disc bikes also have room for 2 - lights on their single caliper. Measure yours to see what will fit. If you have steel braided lines you may want to select our kit with the braided material included. One kit includes enough supplies to install 2 - wheel lights.

Remember when cutting a strip you will need to place a piece of the provided heat shrink tubing over the cut end or paint with the included liquid electrical tape to make a watertight and insulated seal.

SEALED, FLEXIBLE STRIPS

The LEDs on our Value Series™ strips are completely sealed against the elements. They are heat resistant, waterproof and easily cleaned for a lifetime of maintenance free operation. The soft, gel-like strips provide maximum flexibility and a clean and sleek appearance. Their low profile design makes them virtually invisible when placed on the bottom of your tank and their wide viewing angle floods your bike with light. The Value Series™ LED strips are backed by a three-year warranty.

Value Series™ Strips vs. Cut N’ Click™

While many of our professional installers may prefer to use our Cut N’ Click™ 78 LED Engine Kit with Ground Effects due to the installation versatility of our Cut N’ Click™ strips, most do-it-yourselfers will find our Value Series™ Strips easier to install and maintain. Due to their waterproof design they can be placed inside fenders and in other locations where it is not feasible to place our Cut N’ Click™ strips.

Waterproof Black Quick Connector Options

The answer to future routine maintenance. Add these Waterproof Black Quick Connectors to your kit. Install inline on your tank wiring, breather, bags, side panels etc. Wherever future maintenance may require access.