IMPORTANT WARRANTY INFORMATION

We manufacture primarily two types of LED strips for use on motor vehicles: Low Profile Surface Mounted LED strips and Heavy Duty LED strips. An overview of the warranty for each type of strip is below.

Low Profile Surface Mounted LED Strips

Boogey Lights® Low Profile Hi-Intensity Surface Mounted LED light strips are used in a number of Boogey Lights products for a variety of vehicle applications. Where and how these light strips are installed make all the difference in their durability and thus, our warranty. For this reason the duration of the Boogey Lights Low Profile Hi-Intensity LED Light Strips original owner warranty varies based on the vehicle application, use and installation types.

  • Recreational Applications: RVs, Motorcycles, Golf Carts: 3 years
  • Cars/Pickup Trucks/Off-Road: 1 year
  • Marine / Fresh Water: 3 years
  • Marine / Salt Water: 90 days
  • Food/Cargo Truck/Trailer, Other Light Duty Commercial Use / Installation by Boogey Lights technicians in Florence, KY: 3 years
  • Food/Cargo Truck/Trailer, Other Light Duty Commercial Use / All other installation types: 1 year
  • Heavy Duty Truck and/or Trailer Commercial Use / Installation by Boogey Lights technicians in Florence, KY: 1 year
  • Heavy Duty Truck and/or Trailer Commercial Use / All other installation types: 90 days

Note on Commercial Applications: These low-profile surface mounted LED strips are not built to withstand significant flexing or lateral movement of the surface the strip is mounted to. Some examples include on semi-truck trailers as well as tow trucks where there is significant movement, bending or flexing of the surface to which the strip is mounted. Also, the strip can not mounted in such a way as they span multiple mounting surfaces. Mounting them this way will virtually guarantee the strip will fail sooner rather than later. These strips must be mounted to one single continuous smooth, clean, flat, rigid surface and in an area that is protected from corrosive chemicals. Commercial vehicles that frequently travel roads treated with corrosive chemicals often used for melting snow and ice can impact the durability of these LED strips if the strips are mounted in an area that is exposed to these chemicals. Hi-Intensity Strips that fail in these operating environments ARE NOT COVERED UNDER WARRANTY. For these types of operating environments we strongly recommend (and warranty) our HEAVY DUTY LED strips.

RGBWW Low Profile LED Light Strips

Boogey Lights® RGBWW LED light strips have a ONE year, original owner limited warranty when used as an Awning light (or interior light applications) and installed according to the installation instructions on recreational vehicles. Warranty is void if used in any other way.

 

Heavy Duty Hi-Intensity LED Light Strips

Boogey Lights® Heavy Duty Hi-Intensity LED light strips have a 3 year, original owner limited warranty when used in or on recreational vehicle applications;  one year original owner warranty when used in or on commercial vehicle applications.

 

NOTE ON EXTENDED USE. We do not recommend leaving your Boogey Lights® on for 24 hours a day. The LEDs used in these products are very bright; the brightest 12vdc LED lights available. They're designed to be used for accent lighting applications where they are typically powered on for a few hours (rarely at the highest brightest setting) and then powered off. While they can be used in functional lighting applications (e.g. bright white to temporarily illuminate a work area), the lights should not be left powered on for extended periods of time (e.g. 6+ hours) particularly on white and at the highest brightness setting. If the LEDs are left powered on for long periods of time the LEDs closest to the power source will have a burned look to them over time. This is because the amount of voltage being pulled through the LEDs closest to the power source will be higher than the voltage going through the LEDs further down the strip. The end result is that those LEDs closest to the power source will be hotter thus creating the burned look. This will occur mostly when displaying the color white on the full brightness setting but can also occur with other colors if left on at the highest brightness setting. For this reason, we do not suggest leaving these LED lights powered up for extended periods of time particularly on their brightest setting. If you are going to leave the lights on for extended periods of time, we recommend never doing so on the color white and not on the highest brightness setting. Burned looking LEDs is NOT covered under warranty.

 

View the complete limited product Warranty Terms & Conditions here.