Prices for product only. Installation not included.
Installation Docs

2021 Chevy Camaro Under-Glow LED Light Kit

Price as Configured
UPC: 812928024231
Current Stock:
UPC: 812928024231
Price as Configured
Prices for product only. Installation not included.
A Word about Delivery Time Frames

OOS Message

OOS Message

2021 Chevy Camaro Coupe Under-Glow LED Light Kit

Light up the area under your Camaro with a Boogey Lights® LED light kit! Designed specifically for the 2021 Chevy Camaro, this multi-color RGB Under-Glow light kit is incredibly bright. Our low profile hi-intensity LED strips are perfect for mounting under the car on all four sides. They produce a smooth, even glow of light to give your car that custom look.

This Under-Glow Light Kit includes 290 LEDs to light under the Camaro. Our super-bright hi-intensity LED light strips will absolutely light up the area under this amazing car with any of seven different colors and animate them with special effects using the included hand held wireless RF remote control. In addition, you can use your bluetooth enable smartphone that allows you to choose from over 16 million color combinations PLUS program your LEDs with a 2 or 3 sequence color rotation function.

On full power white, total amperage draw is about 3amps. It's significantly less when dimmed or using other colors.

Installation time of this kit takes about 5 hours to do the job correctly.

More About the Boogey Lights® Bluetooth Smartphone APP


Under-glow light with 290 LEDs consisting of 4 LED light strips with power leads and mounting aluminum. Mounting and placement diagram included.
Wireless RF + Bluetooth Combo RGB LED controller with 2 KEY FOB keychain wireless remote controls.
Installation supplies includes wiring kit, 3M Adhesion Primer, Aluminum mounting bars
Installation Manual and Wiring Diagram
One Year Original Owner Warranty

OTHER ITEMS YOU MAY NEED TO COMPLETE YOUR INSTALL. No two installation scenarios are the same. Not everyone shares the same installation quality goals. Some folks are OK with twisting wires together, others want to solder them. Some folks are OK with running wires where they may be seen or unprotected to save money/time, others want a tidy, clean install without any wires showing. Some folks are OK with mounting their LED strips to whatever surface they can find, others want to take the time necessary to build out appropriate mounting surfaces to provide the best lighting effect on their vehicle. The point is it's not possible to provide all the materials necessary for all installation scenarios and quality goals. Our light kits provide the essential components needed for a high-quality, functioning lighting system. Installation of our light kit to your specific vehicle may however require additional items to make it look and fit the way you want. This is particularly the case with electrical wiring and mounting of LED strips. Before proceeding with your installation we suggest you consider THESE OTHER ITEMS.

Bluetooth + RF Combo Controller

Our Bluetooth + RF Combo LED Controller includes our popular Programmable Color Rotation Feature. With any of the Boogey Lights® BLUETOOTH controllers you can control your lights with your Bluetooth 4.0 enabled Android or IOS smartphone. These high-tech controllers are capable of displaying 16 million different color combinations. In addition, lighting effects on the Smartphone controller are signficantly more controllable in terms of speed and intensity. Each color and lighting effect is controlled by "sliders" or a color square on your smartphone screen so you can adjust the speed and intensity to get the lighting exactly the way you want it. Also, all of our SERIES 2 Bluetooth Combo controllers include an RF remote control allowing for quick on/off of the controller. You can operate this controller with the included RF wireless remote OR you can use your Bluetooth 4.0 enabled smartphone and our free smartphone APP (Android and IOS).

These LED strips are designed to be used on vehicles that operate on paved surfaces. They are not designed for off-road use. Broken or crushed LEDs are not covered under warranty. While Boogey Lights® Hi-Intensity LED strips are made for motorsports applications, they will likely not survive a direct strike from a hard object. If you are concerned the LED strips might be hit by road debris due to their mounting location we recommend using our Heavy Duty LED Strips which are better able to survive a direct strike from road debris.

All Boogey Lights® controllers and LED lights operate on 12vdc.

Note: All Boogey Lights® LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferior design when compared with COMMON CATHODE LEDs.

Note: Boogey Lights® LED strips are not intended to be used while driving on public roads and highways. While some states allow the use of LED accent lighting while driving, other states don't. Some only allow the use of specific colors. Be sure to check your local laws and regulations.


Installation of this led light kit takes about 5 hours to do it properly. While none of side panels, bumper or other parts need to be removed from the car, you do need enough room under the car to work. All of the LED strips are first mounted to aluminum which is then screwed to the frame of the car. So you'll need to put the car up on floor jacks or have some other means by which to access underneath the car. You'll also need to drill a small hole in the trunk area that allows the power leads to come up from the bottom of the car to reach the LED controller. All power leads route back to the LED controller which is located in the trunk which is where the battery is. You can download the INSTALLATION MANUAL directly from our website.

Typical Placement

Under Front Bumper

  • 30 LEDs mounted to 1.5" wide aluminum flat bar. That flat bar is screwed to the bottom plastic panel about 18" from the front bumper in the indention already present in the plastics. .

Under Rear Bumper

  • 33 LEDs mounted to 1.5" x 1.5" 90 degree angle aluminum bar. That bar is then mounted to the sub assembly using 3M Re-Closeable Heavty Duty quick-lock. The 90 degree angle is required such that the LED strip shines downward.

Driver and Passenger Sides

  • 114 LEDs are mounted to 1.5" wide aluminum flat bar which is then screwed to the car's frame on each side.

LED Controller

  • The LED controller is mounted in the trunk near the battery. All power leads from the LED strips come together just under the truck area.