Power Lead Wire

Power Lead Wire

Power lead wire is used to extend the power lead connected to a Boogey Lights LED strip to a Boogey Lights LED controller or switch.12vdc use only. Our power lead cable is stranded wire and offered in 2, 4 and 6 conductor formats. Cable is offered in gauge sizes of 14awg, 18awg, 20awg and 22awg. It's important to use the right wire gauge (awg) for the distance and amperage draw. 12vdc power drops quickly over distances. Sold by the foot. Here's our recommendation:

• Runs of 1-25': 22awg  (max of 300 LEDs per run)
• Runs of 26-50': 20awg  or 18awg

Above distances assumes no more than 300 LEDs per run. Sold by the foot. While you can purchase up to 100' of cable of this product for convenience, do not go longer than 50' in a single run when installing.

If you're looking for 'feeder cable' for under-glow installations to support up to 600 LEDs per run, use 18awg cable (50' max run). To support up to 1200 LEDs per run, use 14awg cable (50' max run).  For longer runs (up to 100'), use 14awg to support up to 900 leds.

Note:  We reserve the right to limit orders of more than 250' of cable at a time.  

OUTER JACKET COLORS

• 22, 18 and 14 AWG: Available in Grey only. Includes pull string.
• 20 AWG: Available in White only.

# of CONDUCTORS

• Single Color requires 2 conductor
• RGB requires 4 conductor
• RGBW and RGBA requires 5 conductor (use 6 conductor as 5 conductor cable is not available)

INNER JACKET COLORS

• 2 Conductor: red, black
• 4 Conductor: red, green, white, black
• 6 Conductor: red, green, blue, black, white, yellow

All grey jacketed cable has a pull string.