96 LED Econo-Bagger Light Kit

Install Resources
Current Stock:
size: 8.00 W × 8.00 H × 4.00 L

Check out the Lighting Builder for a more customized experience.

Lighting Builder

OOS Message

OOS Message

96 LED Econo-Bagger Light Kit (Multi-Color)

Light up your V-Twin Bbagger or Touring motorcycle with a Boogey Lights® LED multi-color light kit! For the budget conscious our Econo-Bagger entry level multi-color light kit for use on touring and bagger v-twin motorcycles is ideal!

Our Boogey Lights® Econo-Bagger 96 LED light kit uses HI-INTENSITY multi-color RGB LED strips that are incredibly bright, color-changing strips. These LED strips are thin so they can barely be seen when attached to your bike. Boogey Lights® surface mounted LEDs produce a smooth, even glow of light that floods the entire area. This light kit includes our Boogey Lights RF + Bluetooth COMBO LED Controller. It will display seven colors (steady on + four lighting effects): RED, GREEN, BLUE, WHITE, LIGHT BLUE, BOOGEY LIGHTS GREEN (LIME GREEN/YELLOW), HOT PINK/PURPLE using the hand held RF wireless remote. The lighting effects options for the RF wireless remote include: DIMMING, BLENDING, BREATHING, STROBING. In the Blending, Breathing and Strobing modes these features can be set to remain on a single color or to cycle through each of the 7 pre-set colors. You can also adjust the speed at which this happens. The RF remote control also offers SEVEN levels lighting effects (e.g. 7 levels of dimming).

BLUETOOTH INCLUDED! This LED controller is also BLUETOOTH enabled. Using your smartphone and our free BLUETOOTH APP, you can access even more features including up to 16 million combinations, presets and color rotation programming. More detail about this on the BLUETOOTH tab including a video showing how our Bluetooth APP works.

Waterproof Black Quick Connector Options

The answer to future routine maintenance. Add these Waterproof Black Quick Connectors to your kit. Install inline on your tank wiring, breather, bags, side panels etc. Wherever future maintenance may require access.


Four (4) - 21 cluster hi-intensity multi-color RGB low profile surface mounted LED strips (14" long). Two of the strips have 48" power leads. Two have 36" power leads.
Two (2) - 6 cluster hi-intensity multi-color RGB low profile surface mounted LED strips (4" long) each with a 36" power lead.
One (1) - RGB Multi-Color RF + Bluetooth Combo LED Controller with two RF KEY FOB Wireless remotes. Brake flash integration.
Installation Supplies and Manual
One year original owner warranty

More About the Boogey Lights® Bluetooth Smartphone APP

Note: All Boogey Lights® LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferior design when compared with COMMON CATHODE LEDs.

Brake Light Interface

The LED controller in this light kit also includes are BRAKE LIGHT INTERFACE. This controller includes circuitry that when connected to the brake light circuit, will turn multi-color accent lights to the color red whenever the brakes are engaged. Its a great motorcycle safety feature to make sure you're seen. You do not have to use this feature if you don't want to.


  • Typical installation will have two 21 LED strips installed on the bottom of the tank.
  • The other two 21 LED strips are typically installed on the bag frame support.
  • The shorter 6 LED strips typically install inside the horn cover and behind the breather.
  • All power leads run back to the battery where the controller is mounted.

IMPORTANT NOTE: To achieve the full adhesive strength of the 3M® tape affixed to the back of the Boogey Lights® LED strips 3M® Adhesion Promoter (aka Primer) must be applied to the mounting surface first. This is an important step to ensure a secure bond. The 3M® Adhesion Promoter creates a chemical bond between the tape and the surface such that the LED strip will stay stuck (at least until you decide you want to remove it). Using any other solvent such as rubbing alcohol or acetone is not the same thing as using 3M® Adhesion Promoter. While these solvents will help clean the surface, they do not prime the surface nor can they be used instead of the 3M® Adhesion Promoter. 3M® Adhesion Promoter IS INCLUDED with this kit. If you want your strips to stay stuck it's important to follow the mounting instructions included with the kit and to use the 3M® Adhesion Promoter included.

Did we mention that using the 3M® Adhesion Promoter included in this kit is an important step in the installation process you should not skip?