Save!
Use your Bluetooth enabled smartphone with our FREE Android or iOS APP
FAQs

Bluetooth Only Wireless LED Controller

$54.95
$84.99
(You save $30.04)
Install Resources
SKU: PGU-RC-MC-APP-S1
UPC: 812928021414
Current Stock:
SKU: PGU-RC-MC-APP-S1
UPC: 812928021414
size: 2.00 W × 2.00 H × 2.00 L
Warranty: Original Owner Three (3) Year Warranty on the controller
UPC: 812928021414
Model: BLRC-003
UPC: 812928021803
Model: BLRC-003+
UPC: 812928021810
Model: BLRC-003S

Check out the Lighting Builder for a more customized experience.

Lighting Builder

Bluetooth Only Wireless LED Controller

Control your Boogey Lights® with a Bluetooth enabled smartphone and our free Boogey Lights® APP. Works with your Android® or iOS® Smartphone equipped with Bluetooth 4.0.

This is just like our popular RF wireless hand held remote control EXCEPT the APP on your smart phone controls the lights. PLUS - instead of 7 colors this controller allows you to mix your own colors to create that custom look for over SIXTEEN MILLION COLOR combinations. Preset functions include color switching, blending, strobe, breathing and flashing.

NOTE: This series of Bluetooth Only LED controller has been discontinued. As such, we have limited inventory remaining. It has been replaced with our COMBO WIRELESS RF + BLUETOOTH line of LED controllers which combine both a handheld RF wireless remote AND Bluetooth control capability. Note too that with the exception of the SUPER Bluetooth only controller offered here, all of these Bluetooth only controllers have our SERIES 1 firmware. The Series 1 firmware does not include the programmable color rotation feature that our Series 2 firmware does. More information about the Series 2 firmware is below.

SERIES 1 vs SERIES 2 FIRMWARE: With the introduction of our SERIES 2 LED Controller firmware the Boogey Lights® Bluetooth APP and controller offer the ability to program the controller to display two or three colors of your choice and then rotate those colors in sequence. For example, let's say it's Fourth of July and you want your lights to rotate through the color sequence of RED, WHITE and BLUE . Or, perhaps your favorite sports team's colors are Red and White and you want your RV or motorcycle to continually rotate through a color sequence of RED and WHITE. This SERIES 2 firmware controller and smartphone APP will do that - and more. You can for instance vary the speed of the sequence as well as the brightness. You can also choose from one of two different sequencing effect modes: BREATHING or ROLLING. Additionally, you can save these configurations in up to 3 presets per effect such that you're able to recall the lighting configuration with a press of a button.
LED Controller Options
ORIGINAL - Our original model is rated to 100 LEDs - maybe more depending on your installation. Designed primarily for motorcycles. That's enough to light most bikes front to back. Controller measures 2-1/2" x 1-3/4" x 7/8". NOTE: Does NOT include the Programmabled Color Rotation capability.
PLUS Series - Updated to handle more lights. Rated to 300 LEDs - maybe more depending on your installation. Perfect for those who want to light it all up and then some! Controller measures 2-1/2" x 1-3/4" x 7/8". The PLUS SERIES also has the option of adding our BRAKE LIGHT interface. When connected to the brake light circuit, all of the lights will turn red when the brake is applied.
SUPER Series - We took this up another notch. Rated to 900 LEDs - maybe more depending on your installation. Perfect for Can Am Spyders, Electra Glides, Gold Wings or other large cruisers, trikes and those who pull a trailer and want it lit up. Also works great on golf carts, cars, trucks or any vehicle requiring numerous strips or rolls of lights. The controller is a bit larger at 4-1/4" x 2-1/4" x 7/8".

Note: The SUPER Series Bluetooth only is still available in both the SERIES 1 and SERIES 2 firmware.
HEAVY DUTY Series - Our biggest controller. Rated to at least 1800 LEDs (5050 LEDs, RGB). Ideal for use with RV, marine, home and commercial applications where you want to power a large number of LEDs. Controller dimensions are: 5.5" long x 3.25" wide x 1.5" high. Overall length is 7.5" to allow for wires feeding the controller.

BRAKE LIGHT INTERFACE Option Available. We offer a BRAKE LIGHT INTERFACE on the PLUS version of this controller. The optional BRAKE LIGHT INTERFACE includes circuitry that when connected to the brake light circuit, will turn multi-color accent lights to red whenever the brakes are engaged. Its a great motorcycle safety feature to make sure you're seen.