Multi-Function RF Wireless LED Controller with M7 Style Remote

Install Resources
UPC: 812928024019
Current Stock:
UPC: 812928024019
size: 2.00 W × 5.00 H × 5.00 L

Check out the Lighting Builder for a more customized experience.

Lighting Builder

RGB LED Controller with Wireless RF Remote

We've taken our popular wireless multi-function remote control that's been in use for years on our motorcycle lighting kits and replaced the keychain FOBs with a larger format M7 style wireless RF remote. The M7 style remote is a larger remote with larger buttons that are easier to see and use. This remote is ideal for RV and home installations. We've also added a power-on light to make it easy to tell when the unit has power. Additionally, when pairing the controller with the remote, the power button will flash. The controller technology remains the same and includes color switching, blending, strobe, breathing, and flashing functions. While the controller itself is water resistant, the remote is not. The controller is to be installed in a location protected from water. One M7 remote is included. Up to three M7 remotes can be paired with one controller.

JUNE 2020 NOTE: This M7 remote, RF only wireless LED Controller is being replaced with our COMBO RF+BLUETOOTH LED Controller which includes the M7 wireless remote plus BLUETOOTH.

Remote Control Options
** NO LONGER AVAILABLE ** PLUS Series      : Rated to 300 LEDs - maybe more depending on your installation. Perfect for those who want to light it all up and then some! Controller measures 2-1/2" x 1-3/4" x 7/8".   
** NO LONGER AVAILABLE ** SUPER Series      : We took this up another notch. Rated to 900 LEDs - maybe more depending on your installation. The controller is a bit larger at 4-1/4" x 2-1/4" x 7/8".   
HEAVY DUTY Series      : Rated up to at least 1800 (5050 LEDs, RGB), perhaps more depending on your installation. Ideal for use with RV, marine, home and commercial applications where you want to power a large number of LEDs. This controller is the largest in our controller series measuring 5.5" long x 3.25" wide and 1.5" high. Note that the overall length to accommodate room for wires is 7.5".    We also offer an Extension Antenna Option for this controller.

VIDEO: How to Pair Your M7 Remote to the Controller

The hand-held remote itself measures 3 3/8" x 1 5/8" x 1/4".

- M7 Remote uses one CR2025 3vdc alkaline battery (included with remote).

All Boogey Lights® controllers operate on 12vdc which is readily available on just about any motor vehicle. Our entry level base controller (BLRC-002, BLRC-002+, BLRC-010+) is designed to work with 12vdc power between 11.9 and 13vdc which works with the vast majority of vehicles. However depending upon your vehicles power source (charger or inverter), the amount of dc voltage your vehicle is putting out may exceed these design specifications (commonly referred to as over-voltage). In this situation our entry level base controller will either shut itself off or the LEDs will dim if the voltage level exceeds the range for too long. This is to protect the circuitry in the controller from getting too hot. In these situations we suggest either upgrading to the optional SUPER or COMBO CONTROLLERS which are more robust and sophisticated over-voltage circuitry built-in. You can also purchase our optional BATTERY SAVER which can be used inline to protect the controller. If you're unsure or have questions, give one of our technicians a call.

NOTE: Our controllers have built in protection against short circuit or reverse polarity situations. If it detects any problems the controller will shutdown and not function until the fault is repaired. While these are rated for a specific number of LED's your particular installation may affect the actual number of LED's you can run on these controllers.