FAQs

Car LED Foot Well Interior Light Kit

$99.99
Install Resources
SKU: KMV-CAR-INT-SC-NC
Current Stock:
SKU: KMV-CAR-INT-SC-NC
UPC:
size: 12.00 W × 12.00 H × 12.00 L

Check out the Lighting Builder for a more customized experience.

Lighting Builder
  

OOS Message

OOS Message

Car LED Foot Well Interior Light Kit

Light up your front seat foot well area with a Boogey Lights® LED light kit!

The kit includes 36 LEDs that will light the foot well area on most standard cars. Offered in both single color and multi-color LEDs. For multi-color you can light up the foot well area with any of seven different colors and animate them with special effects using the optional wireless RF remote control OR, use your Bluetooth enabled smartphone and our FREE IOS/ANDROID app to control the lights. The Boogey Lights® BLUETOOTH LED controller included with this kit will allow you to control your lights with your Bluetooth 4.0 enabled Android or IOS smartphone. These high-tech controllers are capable of displaying 16 million different color combinations.

In addition, lighting effects on the Smartphone controller are signficantly more controllable in terms of speed and intensity. Each color and lighting effect is controlled by "sliders" or a color square on your smartphone screen so you can adjust the speed and intensity to get the lighting exactly the way you want it. Also, all of our SERIES 2 Bluetooth Combo controllers include an RF remote control allowing for quick on/off of the controller. You can operate this controller with the included RF wireless remote OR you can use your Bluetooth 4.0 enabled smartphone and our free smartphone APP (Android and IOS). See the CONFIGURATIONS tab on the navigation bar for more detail on each of the switch and LED controller configurations offered for this product.

We offer an optional ADD-ON rear seat LED light kit if you want to light up the foot wells in the rear seat (under the front seats). All 5050 LEDs offered in this kit are based on our low-profile surface mounted LED strips.

Includes
Base kit includes 2 - 18 LED strips for each front seat foot well. Each strip is about 12" long.
Each LED strip includes a 10' power lead.
Optional LED strips (2 - 18 LED strips) can be added for the rear foot wells.
Optional Switching/LED Controller for both single color and multi-color. See CONFIGURATION TAB.
Install supplies including 3m Adhesion Promoter.


OTHER ITEMS YOU MAY NEED TO COMPLETE YOUR INSTALL. No two installation scenarios are the same. Not everyone shares the same installation quality goals. Some folks are OK with twisting wires together, others want to solder them. Some folks are OK with running wires where they may be seen or unprotected to save money/time, others want a tidy, clean install without any wires showing. Some folks are OK with mounting their LED strips to whatever surface they can find, others want to take the time necessary to build out appropriate mounting surfaces to provide the best lighting effect on their vehicle. The point is it's not possible to provide all the materials necessary for all installation scenarios and quality goals. Our light kits provide the essential components needed for a high-quality, functioning lighting system. Installation of our light kit to your specific vehicle may however require additional items to make it look and fit the way you want. This is particularly the case with electrical wiring and mounting of LED strips. Before proceeding with your installation we suggest you consider THESE OTHER ITEMS you may need.


Note: All Boogey Lights® RGB LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferior design when compared with COMMON CATHODE LEDs.

Configurations

This product has a number of configuration options. The base kit includes LED strips for each front seat foot well. You can however also add two rear seat foot well LEDs too.

Switching & Controller Options

Single-Color Lighting configurations
  • No Switch (default). Lights will need to be wired into your existing existing switch. Make sure the circuit you're connecting to is capable of handling the amperage draw. This option is for Single Color LEDs.
  • Wireless RF ON/OFF with Key Fob. A simple wireless ON/OFF remote with 2 handheld remotes. The wireless ON/OFF remote is capable of switching a maximum of 5 amps. Single Color LEDs only.
  • Wireless RF ON/OFF/DIM/STROB/FADE/BREATH with Key Fob. A step up from the ON/OFF wireless remote that gives you the ability to also dim, strob, fade and "breath" the LEDs.
Multi-Color Lighting configuration
  • Wireless RF + Bluetooth RGB LED Controller with Key Fob style remote. 900 LED Capacity. This controller is designed to be used with RGB/Multi-Color LEDs. In addition to ON/OFF, this controller provides DIMMING, STROBBING, FLASHING, COLOR BLENDING and BREATHING capabilities. Plus, this LED controller will work with your Android® or iOS® Smart phone equipped with Bluetooth 4.0 (max of 16 million color possibilities). With the included RF remote you get all of the functionality of our popular Multi-Function Remote Control that allows you to change between 7 colors and functions of on/off, blending, strobing, breathing, flashing, fading and dimming. You can also use your Bluetooth enabled smart phone to create that custom look with over 16 million different color combinations plus three pre-sets and color rotation programming. See additional details (with video) on the Bluetooth APP and it's capabilities on the BLUETOOTH APP TAB appearing on this product page. It will also work with the included Key Fob RF wireless remote. You get the best of both worlds.

(see photos of the RF wireless remotes referenced for these controllers in the product image carousel above)