Fender Lighting LED Light Kit Add-On for Cars
Fender Lighting LED Kit Add-On for Cars
This Fender Lighting LED light kit is an ADD-ON. It is intended to be used with either the Boogey Lights® RGB Multi-Color UNDER-GLOW Car light kit or the Single Color UNDER-GLOW Car light kit which are sold separately. This ADD-ON light kit is available in either RGB Multi-Color or Single-Color to match the base Under-Glow Car Light Kit. The kit is designed to light up the four fender areas.
These LED strips are designed to be used on vehicles that operate on paved surfaces. They are not designed for off-road use. While Boogey Lights® Hi-Intensity LED strips are made for motorsports applications, they will likely not survive a direct strike from a hard object. Crushed or broken LEDs are not covered under warranty. If you are concerned the LED strips might be hit by road debris due to their mounting location we recommend using our Heavy Duty LED Strips which are better able to survive a direct strike from road debris.
Important Note on Single Color Purple LEDs. Purple LEDs are really UV. They are not nearly as bright as the other colors. Some people like the soft purple look but if you're looking for a color that is realy bright and bold, purple is not the color for you.
All Boogey Lights® controllers and LED lights operate on 12vdc.
Note: All Boogey Lights® LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferior design when compared with COMMON CATHODE LEDs.
Note: Boogey Lights® LED strips are not intended to be used while driving on public roads and highways. While some states allow the use of LED accent lighting while driving, other states don't. Some only allow the use of specific colors. Be sure to check your local laws and regulations.