LED Foot Well Interior Light Kit for Cars (Multi-Color RGB)

$149.99
Install Resources
SKU: KMV-CAR-FS-RGB-C-PLUS-RF
Current Stock:
SKU: KMV-CAR-FS-RGB-C-PLUS-RF
UPC:
size: 8.00 W × 8.00 H × 4.00 L

Check out the Lighting Builder for a more customized experience.

Lighting Builder
Add to Wishlist
Pay Later in 4 Equal Installments, Interest Free!

OOS Message

OOS Message

LED Foot Well Light Kit for Cars (RGB, Multi-Color)

Light up your front seat foot well area with a Boogey Lights® LED light kit! Designed specifically for use in motor sports applications, this multi-color RGB light kit is incredibly bright. Our low profile hi-intensity LED strips are perfect for mounting underneath your dash, in the foot well area. They produce a smooth, even glow of light to give it the custom look.

The base kit includes 36 LEDs that will light the foot well area on most standard cars with any of seven different colors and animate them with special effects using the included wireless RF remote control OR, use your Bluetooth enabled smartphone and our FREE IOS/ANDROID app to control the lights. The Boogey Lights® BLUETOOTH LED controller included with this kit will allow you to control your lights with your Bluetooth 4.0 enabled Android or IOS smartphone. These high-tech controllers are capable of displaying 16 million different color combinations. In addition, lighting effects on the Smartphone controller are signficantly more controllable in terms of speed and intensity. Each color and lighting effect is controlled by "sliders" or a color square on your smartphone screen so you can adjust the speed and intensity to get the lighting exactly the way you want it. Also, all of our SERIES 2 Bluetooth Combo controllers include an RF remote control allowing for quick on/off of the controller. You can operate this controller with the included RF wireless remote OR you can use your Bluetooth 4.0 enabled smartphone and our free smartphone APP (Android and IOS).

Each strip has authentic 3M industrial strength backing tape affixed to the back of the strip making them easy to install. Installation supplies includes 3M promoter which means the strips will not come off unless you want them to.

We offer an optional ADD-ON rear seat LED light kit if you want to light up the foot wells in the rear seat (under the front seats).

On full power white, total amperage draw is about .88amps. It's significantly less when dimmed or using other colors.

More About the Boogey Lights® Bluetooth Smartphone APP

 

Includes
2 - 18 LED (RGB) low-profile hi-intensity light strips each measuring 12.25" long. Each include a 5' power lead. The LED strip can be shortened if needed by simply cutting where indicated. LEDs are mounted on black PCB made of 2 ounce copper with an epoxy coating to protect the LEDs. The strips are IP65 rated.
1 - Wireless Combo RF + Bluetooth RGB LED Controller with 2 KEY FOB key chain wireless remote controls. This controller will power up to 300 LEDs.
Wiring kit which includes a Buddy Fuse Extender making tapping into 12vdc power on your fuse block easy.
Installation Supplies
Installation Manual and Wiring Diagram
One Year Original Owner Warranty

Extra 3M Adhesion Primer

3M Promoter is a powerful adhesion primer. It's an essential step in the installation process but you don't need much of it to make it work. A simple single swipe on the surface you're mounting the light strip to is all you need. Our lighting kits include enough 3M Adhesion Primer to mount the strips in the kit for most installations. Some customers however feel better if they "paint" the mounting surface completely with it -- which is fine if you want to but not necessary. The problem is that 3M Adhesion Primer isn't readily available everywhere; particularly weekends, holidays and evenings. If you use all of the primer that's included with the kit but run out before you're finished, you'll have to wait to finish the job until you get more adhesion primer. If you're one of those people who would prefer to have a little adhesion primer left-over just in case, we offer the option of adding additional tubes to your order. Or, if you prefer, an entire 8oz can of 3M Adhesion Primer can be added to your order.

All Boogey Lights® controllers and LED lights operate on 12vdc.

Note: All Boogey Lights® LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferior design when compared with COMMON CATHODE LEDs.